PHC2MQTT v5.02.06 Dimmer Rückmeldung fehlt

Hello Simons,
I've been playing around with your hardware for a few days now, and by the way, great work. Unfortunately, the dimmer value feedback isn't working (or at least not for me). 
When I set the brightness in Home Assistant, everything happens correctly, but the percentage feedback doesn't change.
When I set the feedback value manually (MQTT Explorer), it is accepted by the GUI.

2025-12-31,10:35:34,I,MQTC,<m2p/cmd/ccmd=dim.2.out1.set.117.1
2025-12-31,10:35:34,I,EXTC,>dim.2.out1.set.117.1
2025-12-31,10:35:34,I,EXTC,<rsp=0
2025-12-31,10:35:34,I,STMD,<cmd/dim.2.out1=set.117.1
2025-12-31,10:35:34,I,MQTC,>p2m/cmd/dim.2.out1=set.117.1

The command line also shows that the corresponding command is missing.
I would propose something like:
MQTC,>p2m/sta/dim.2.lvl1=117

could you add this?

Best
Arne

 

Hi Arne,
Dimmers return only the on/off state of the dimmer when you send a command.

This is because the final dimming value is reached after the specified time (1...x seconds).

You need to send a status command (dim.0.status) to get the on/off state AND the level (0-255) per dimmer channel.

mvg, Jo

Hi Jo,
thx
I solve the return value in HA with the following automation: